Citation
American Psychological Association 7th edition (APA 7th)
🇺🇸 English, US
Carreño-Morelli, E., Rodriguez-Arbaizar, M., Cardoso, K., Nagaram, A. B., Girard, H., & Rey-Mermet, S. (2020). 3D printing of titanium parts from titanium hydride powder by solvent jetting on granule beds. International Journal of Refractory Metals and Hard Materials, 92, 105276. https://doi.org/10.1016/j.ijrmhm.2020.105276
| Formate | |
|---|---|
| BibTeX | |
| MARCXML | |
| TextMARC | |
| MARC | |
| DublinCore | |
| EndNote | |
| NLM | |
| RefWorks | |
| RIS |
Résumé
Titanium parts are produced by the “Solvent on granules 3D-Printing” technique (SG-3DP). Angular Titanium Hydride powders are used. A special purpose table-top machine, designed and built in a previous development, is used to print green parts, which are subsequently debinded, dehydrided and sintered in a muffle furnace. Porous electrode plates are produced with and without hole grids. The parts exhibit good shape preservation, with open interconnected porosities between 55 and 59%. The microstructure is characterized by optical metallography and scanning electron microscopy. In addition, experimental watch cases have been successfully printed and sintered. The results show the feasibility of using hydride powder for 3D-Printing of complex parts with good shape preservation.